Aquaknow

You have hired a company who has located the presence of fresh groundwater on your land, and you have employed the services of a water well driller. Clean, clear water now runs from your taps! But tests on water must be conducted before you can be sure your water is safe for you and your family.

What would the tests show? First of all, you would learn of the naturally-occurring chemicals that are present, which may not be harmful but may require you to add a water treatment system so the water is more suitable for use. These include minerals in which the water has had contact underground, such as calcium, magnesium and iron. As well, gasses and dust from the atmosphere may come in contact with your water supply too. As time goes on, if your water source is located near an industry such as an agricultural livestock operation or chemical plant, your water may become contaminated from the run-off so frequent re-testing is necessary.

The tests on water would indicate if metal from the pipes and fixtures that it runs through is being dissolved and getting into the water supply. Tests would show if the water has a low alkalinity which is more likely to corrode the pipes and allow lead, cadmium, zinc or copper into the water. Fortunately these minerals can be detected through laboratory testing at a reliable company such as AquaKnow. Once identified, the chemicals and minerals can be removed through water treatment, but the water still needs to be tested annually or more often if there are concerns.

With the ever-increasing numbers of consumer products being manufactured in plants and factories all over the world, it’s always important to conduct tests on water on an annual basis. Various countries are recognizing the harmful effects of emissions on the environment and putting restrictions in place, such as the Safe Drinking Water Act which the United States passed in 1974. In Canada, a contaminated water source in the small community of Walkerton, Ontario caused several people to die and many to become sick, resulting in an inquiry that recommended stronger legislation to be enacted to ensure safe water protection throughout the country. Other countries have experienced similar tragedies and continue to have episodes of illness, with up to 80 percent attributed to the ingesting contaminated water. In extreme cases, bottled water may have to be used for cooking, making baby formula and drinking.

Arsenic occurs naturally in the ground and cannot be detected by taste, smell or color. It is only discovered through tests on water. As high levels have been shown that may lead to an increased likelihood of cancer, diabetes and other medical conditions, it is imperative to test. Also radon is a radioactive gas that also occurs naturally and is recognized as a carcinogen.

At AquaKnow, we can run tests on water for individuals, municipalities, golf courses and recreation areas, as well as businesses who wish to ensure their operation is not contaminating the ground water source. Go online at www.aquaknow.com or call us at 877-734-7661 ext. 2 to find out more about our services. By getting one of our testing kits, you can check on the safety of your water and use it with confidence.

Water quality changes over time. A test on water should be performed at least one time a year if you own a water well to detect any contamination and to ensure quality drinking water for your family. As a well owner, it is extremely important to maintain regular testing because your water is not regulated by any outside source, meaning you are responsible for proper maintenance and testing of your well site.

If you live in a residential area, where water is provided to you through a city water system, you are still urged to conduct a test on water. Even if the city water is regulated through a Safe Drinking Water Act, enforcing strict water testing standards and demanding approval from the government, no one is safe from contamination. You can only lower your risk by testing your water on a regular basis.

People are often confused by the terms, “pure water” and “safe drinking water”. Pure water does not exist naturally in the environment. It contains no minerals or chemicals and has been filtered and processed for consumption. Safe drinking water, the water from our taps, has natural minerals and chemicals, such as potassium, calcium, sodium or fluoride, which are not harmful to humans and can actually be a beneficial source of minerals. Safe drinking water is the standard for our water systems.

When water is analyzed, quality is defined by its chemical content, physical content and biological content. A test on water can be as basic as tasting it, making a visual observation of its color or simply smelling it for odor. If your water seems cloudy, tastes strange or has an odor of any kind, a Coliform test will reveal if there is a presence of bacteria in the water. If the test on water reveals no Coliform, it is safe for consumption. If bacteria are found, the source needs to be investigated. In a well, the problem may involve the structure of your well, such as a crack in the well casing, which could provide an entry point for contaminated surface water. Once the source is located, you should immediately fix the defect and disinfect your entire system, including pipes and pumps.

Water is the most valuable resource we consume daily, which is why it is vital to maintain its quality. Cases of microbial disease are becoming prevalent in an alarming number of drinking water systems. The Public Health Agency of Canada reported a link between gastroenteritis in humans and contaminated water supply. Because of this risk, stricter water quality guidelines are being discussed. Health should be a main priority, especially if you are a well owner and are exempt from government water regulation. A regular test on water supply is necessary for your health and the continued luxury of safe drinking water in your home.

AquaKnow, in association with American Water Surveyors, performs water analysis for both residential and commercial customers, including public water systems, bottled water plants, well drillers, food producers and many more. With a priority and dedication to water quality, AquaKnow provides trusted and affordable water testing kits for wells, municipalities, and gas drilling sites, where you can obtain a sample and send it to their laboratory for efficient testing.

To contact AquaKnow:
Phone: 877-734-7661
817-788-5716
Fax: 817-210-4225
Email: info@aquaknow.com

Water is our wellbeing. We use it for cooking, bathing, drinking, cleaning and many more of our daily activities. Without it, human beings wouldn’t be able to survive. Drinking contaminated water is like being without water, meaning it could have lethal effects, which is why a consistent test for water quality is important no matter where you live or where your water supply comes from.

A test for water quality is vital if you receive your water from an underground well. The EPA suggests testing your well water at least one times every year to keep you up-to-date on the quality of your family’s drinking water.

Groundwater is generally safe to consume and contamination of well water is usually the result of improper installation or cracks in the casing of the well, which can cause surface water to leak into your supply. National Groundwater Association recommends building a well on level ground, away from any source of possible pollution. They also encourage you to check the structure of your well regularly (pipes, pumps and casing) to ensure no structural defects.

Private well owners are not regulated by government water testing standards and are responsible for their own testing. In other words, it’s up to the individual owner to guarantee they have safe drinking water.

Though city water supplies are regulated through a Safe Drinking Water Act (water systems are held to specific testing standards and need to be approved by state and federal governments), you should still test for water quality to be absolutely sure it is safe for your family to consume. And because cities have various water distribution systems, it is not uncommon for naturally occurring contamination.

Contamination comes in many forms. Most are colorless, tasteless and odorless. This is dangerous because it has people believing what they are drinking is safe, which is not always the case. A test for water contamination includes total levels of Coliform, indicating the presence or absence of microorganisms in the water. If Coliform is found in the water, it’s usually contaminated, and further tests are done for Escherichia coli (E. Coli) and Heterotrophic Plate Count (HPC).

The health risks of contaminated water vary. If you ever experience unexplained nausea, lung irritation, dizziness or a skin rash, your water may have microorganisms and should be tested immediately. If left untreated, long-term water contamination may lead to liver and kidney damage, cancer, immune deficiency and gastrointestinal illness for those who consume it.

Water is the basis for all life. A simple test for water contamination will continue to reassure safe consumption and well being for you and your family.

AquaKnow is associated with one of the most independent water testing laboratories in the United States. It provides a range of services for commercial and residential customers. Some of their products include water-testing kits for well water, municipal water, quick bacteria checks, and gas drilling kits, which can be ordered and sent to the customer with simple instructions on how to take a sample collection. The sample is then sent back to the lab for testing. AquaKnow values their customers and are willing to answer any questions you may have about the process.

To contact AquaKnow:
Phone: 877-734-7661 or 817-788-5716
Fax: 817-210-4225
Email: info@aquaknow.com

Approximately 15 percent of Americans rely on their own private drinking water supplies, and these supplies are not subject to EPA standards. It’s up to you to test your water for safety, which should be done annually. You don’t have to pay someone to draw a water sample from you home and send it to a lab for analysis. You can order a test kit, draw the sample yourself and mail it back to a lab for a comprehensive test for water contaminants. And you can receive the results in less than two weeks. If you notice a change in color, taste or odor, get your water tested immediately. www.aquaknow.com has kits designed to test your samples from a broad list of up to 103 contaminants to as few as one. All at very afforable prices. You can’t afford not to spend a little to provide maximum safety for you and your family. Call AquaKnow today and talk to one of their representatives about how and why you should do a water test. 877-734-7661

Floods are one of the world’s most common natural disasters. There is a 26% chance of experiencing a flood and only a 4% chance of having a house fire (source: www.fema.gov). Floods can be caused by Mother Nature—hurricanes, tropical storms or other heavy rains, storms or thaws—or human nature—clogged drainage systems or changes in development of the area. If you have a well providing the drinking water for your property you should be wary of floods and prepare your wells. There are precautions that you can take to protect the well, but do not rely on them. Test water in the well before and after.

After a flood the water can become contaminated due to floodwater entering the well or the aquifer that feeds it. The contaminants in the flood water come from livestock waste, herbicides or pesticides, sewage and more. As well, the water in the well may become contaminated by surface water runoff even if the surrounding areas have not been flooded. Wells that do not have watertight caps or seals are at the greatest risk as well as wells that do not have a grout seal between the walls of the well and the drilled hole. If the well itself was submerged with flood water, it is at greatest risk. Test water after any of these conditions.

Before a flood, you can protect your well to minimize the impacts of the flood.

Ensure the land around the well slopes away so that the water will flow away from it. The well casing should be at least 30 cm above ground or above anticipated flood water level. Also, as mentioned above, be sure that the seals and casings of the well are in good condition. You can give extra protection to the well by covering it with plywood and tarps and securing it with sandbags. Prepare the area that will flood beforehand. Clear away all livestock waste, fertilizers and pesticides and empty septic tanks prior to the flood. Remember that these are precautions only and you still must test water afterwards.

Don’t forget about any unused wells in the area. Floodwaters entering an abandoned well can still contaminate your active well or its aquifer. Be sure that unused wells are permanently sealed.

Following these precautions is no guarantee that the well water will not become contaminated. After a flood, it is very important to decontaminate the well with chlorine to kill the bacteria. Once chlorinated, the well should sit for 6-8 hours before being flushed. This procedure may need to be repeated more than once. After the chlorination process, test water for drinkability. The chlorination process will clean away the fecal coliform bacteria but not the nitrates, pesticides or heavy metals. Further water tests will need to be performed.
Be sure that you consult professional well drillers for help in securing your well before the flood and test water experts after the flood to give you peace of mind. AquaKnow has a large range of test water kits and the expertise to advise you on which ones you need. Professional test laboratories can also analyze the water test to see if there are any contaminants in it. Contact AquaKnow at 877-734-7661 to consult with one of their representatives. info@aquaknow.com

Test on water is performed regularly on water in the municipal supply, but what about private water wells? According to the EPA, approximately 15% of Americans use water from their own wells. If you are one of those, you should be aware that your well is not subject to EPA standards and experts are not regularly checking the quality of your water source. You need to test the water yourself.

The risk of contaminants in your well water will be minimized if you have a well-built and well-maintained well. But environmental qualities will affect it. The aquifer quality that the water is sourced from is important as is the types of activity going on in the area. Although some pollutants are easy to spot, such as changes in the waters color, taste or smell, not every problem is identifiable without a water test. Your septic system may be a source of contamination. If you have one, make sure it, too, is well maintained and protected.

You should test the water every year for the typical contaminants such as total coliform bacteria, nitrates, dissolved solids and to ensure a healthy PH balance. In addition, if you suspect anything else, test the water for that too. If you need advice on the types of problems you may be experiencing, contact your local experts or a trusted water testing company such as AquaKnow. The health department, well contractors or public water system officials will be able to advise you. We provide kits that test the water that are specific to their contaminant, although some kits test for multiple problems. However, you do not want to spend money testing for what is not likely to be present so it is best to have information in advance.

Test the water if you notice or have recently repaired any damage to the well itself. If the casing has been damaged or the seals are cracked, if the cap is broken or missing, contaminants may have gotten in. Any damage to the well must be repaired at once. If you find any contaminants present, these also must be immediately taken care of.

Keep your well in good condition. Do not mix or use pesticides, herbicides, fertilizers, fuels or other pollutants near the well. Do not use your septic system or the well, even an old or unused well, to dispose of any hazardous materials. The well casing should always be above ground. After a flood, you should pump the well until the water runs clear. However, do not use the water from the well if the well itself has been flooded. Contact your local health department. Lastly, keep accurate records of your well’s history. Note any well maintenance done to it, including cleaning and disinfecting with chemicals. It is important to test the water, but maintenance is the best part of prevention.

AquaKnow will help you test the water. We are a trusted and affordable water quality testing service located in Fort Worth, Texas. Our kits can test for a variety of contaminants at once and we understand the compliance regulations that must be followed. Once you have tested the water, our laboratories will interpret those results for you. Contact us at 877-734-7661 to consult with one of our representatives. We will advise you which tests you will need and ship a test kit to you with clear and easy instructions as to how to collect the water sample and return it to the lab. We will be there to answer all the questions you have.

Water is essential to life. Be sure that the water you provide will keep your family safe and healthy. www.aquaknow.com

For anyone who owns a well or uses one nearby, when was the last time you checked the water quality for impurities, chemicals, metals or organisms? As water is a universal solvent—that is, over time it will dissolve anything it comes into contact with, be it metal, rock or living organisms—wells may have more than just the usual minerals, depending on what it has percolated through to arrive at your well. For test water materials, AquaKnow can send you a package that will help you identify what is in your well.

Typical well water contains minerals such as calcium, magnesium, iron and manganese because of its contact with rock formations containing these materials. The minerals in well water depend on the type of rock it has had contact with. Without test water materials, the safest way to drink your well water is to boil it before consumption. But what about washing clothes, dishes and children? What about livestock? AquaKnow is partnered with certified laboratories that test the drinking water from wells worldwide.

Large municipalities and cities have their own water delivery system. If a river runs through it, then that is what the citizens drink and use and the city or municipality has a station to clean and deliver the water as well as a station to clean the water after its use to ensure a lower environmental impact. There are no such stations and systems for rural areas, farms and acreages. Additionally, listen to the news and find out if there has been any oil drilling or mining in the area. These is yet other industries that can have a negative effect on drinking water. Community wells for small towns should be checked frequently and AquaKnow has products and kits available for anyone from ranchers to municipalities of any size. Their kits can test for hundreds of harmful bacteria, chemicals and impurities. Test water kits are shipped within 48 hours of the order.

If you experience nausea, skin rash, lung irritation or dizziness, then your water may be contaminated with something harmful. Long-term effects of contaminated drinking water include cancer, kidney and liver damage and deficiency in the immune system. Bad drinking water can be especially harmful to young children, pregnant women and the elderly. Get your test water kit soon and talk to your local authorities (if living in a municipality) or those who also obtain water from the well you use.

Peace of mind is the primary objective for the fine ladies and gentlemen at AquaKnow and they will help you achieve this where your well water is concerned. If you notice any drastic changes in your water, it might be time to consider test water kits. Contact your local municipality or use the information below to find out what you can do to ensure the safe usability of water. However, many contaminants do not change the appearance or taste of well water, so if any adverse effects mysteriously appear in you or your loved ones, consider the water source.
For more information, please contact AquaKnow at:
Phone 877-734-7661, 817-788-5716
info@aquaknow.com
www.aquaknow.com

Since humanity went through industrialization throughout the 18th and 19th centuries, there have been large changes in the amount of chemicals and bacteria that can affect us through the environment, our drinking water and the air. A person may do a test on water, no matter the source of it, to find how drinkable it is. Apart from Beaver Fever (the result of drinking stream water that has animal feces in it) there were few ways to be harmed from drinking water before the 19th century. Even then, many people boiled their water before drinking it just to be sure. This has been the best and most thorough way to cleanse water, but these days, we boil water to eat with, water is boiled for us so we may enjoy a hot shower and water is not considered dangerous in many municipalities and cities.

Pollution did not exist before humanity invented it, and now we deal with smog, acid rain and impure water every day. Birth defects and disease can be transmitted through unsafe drinking water. The cities of North America are mostly outfitted with systems that clean the water for the cities inhabitants, but what about those who depend on well water for their everyday needs? There are basic kits available for test on water, but why not use a professional, certified business like AquaKnow to help you attain peace of mind with your drinking water.

There have been many instances of people falling ill or even dying because of unsafe drinking water. Now, there are many ways to conduct a test on water to find its drinkability. AquaKnow is one of the leading businesses that supply tests on water for quality. They are partnered with laboratories that test the drinking water for wells worldwide.

Since 2010, AquaKnow has been helping those who access wells determine whether or not their water is safe to drink. They provide many products that test for hundreds of contaminants from metals to bacteria to minerals. Products for municipalities and small cities are available and provide a thorough check on the water. Their partner labs are certified for national testing in most states, so check their website to ensure they have been certified in yours.

AquaKnow is affiliated with the groundwater surveyor American Water Surveyors (an A+ rated Better Business Bureau member) and can put you in touch with this business, which will help you in your well water finding needs. Of course, having to find a new well is the worst-case scenario, but it is better than having all well users go back to the 18th century and have to boil water before every use. AquaKnow not only provides test on water, but also can help you obtain peace of mind where your drinking water is concerned.

To find out more about AquaKnow, what they do, products and services, their website and contact information is below:
Phone: 877-734-7661, 817-788-5716
info@aquaknow.com
www.aquaknow.com

When many homeowners think of having someone test the quality of their well water, they envision massive equipment, dangerous chemicals, and of course, massive expenses. Because of this notion, an alarming number of well owners admit that they have never tested their drinking water for quality and contamination. Simply put, this is a very risky move and one that could potentially put you and your loved ones in danger. It is remarkably simple and affordable to test the water in your well for contaminants, and it is certainly a very worthwhile choice to make.

Wouldn’t I Know If There Was a Problem?

This is one of the most common reasons why people fail to test water supplies for contaminants and toxins. There seems to be a common belief that water would smell or taste different if there were contaminants. Many also disregard the need for testing because “nobody is sick”. These can actually be very dangerous ways of thinking. Most contaminants are not only too small to see, but colorless and odorless. This means that they are not going to be detectable simply by drinking the water. Because many contaminants can take years to make you sick or to cause cancer, detecting them early is critical.

What Kinds of Contaminants Can Get Into My Water?

If you are curious just what might be lurking in your well water, you may just find yourself surprised. Many wells are found to have trace amounts of radioactive materials. This is especially true for people in mountainous regions where naturally radioactive substances are found in rocks and soil, as well as in certain areas where nuclear power is a primary source of energy and seepage from pipes may have occurred over time.

Of course, not all wells turn up radioactive substances. It is not entirely uncommon, however, for a test on water in a well to turn up levels of arsenic, lead, iron, fluoride, and even numerous types of bacteria. As snow melts and rainwater seeps into the ground, the water starts to carry particles of pollution, animal waste, ground and air chemicals, and a variety of other substances into the supply of drinking water. There are actually a surprising number of potentially harmful substances that can appear in drinking water, most of which can be detected with a standard water analysis.

Can’t I Just Buy a Filter?

While a filter that attaches to your hoses or faucets can be ideal for getting larger particles out of your water, there are many things that can pass through barriers, whether they use charcoal, reverse osmosis, or other filtration methods. The simple fact is that all well owners should be aware of the potential for lead, radon, and other potentially hazardous materials in drinking water. Testing for these substances is not expensive and not overly time consuming, which means that all well owners should take the time and expense of providing tests on a fairly regular basis to help keep their water clean and their families safe. Contact AquaKnow to order your water test kit at 877-734-7661 ext 2. http://www.aquaknow.com/

With so much news making headlines these days around the world about the contamination of water in the aftermath of disasters such as the BP oil spill and the Fukushima nuclear disaster, it has gotten a number of people thinking about pollution and water quality. Even if you do not live anywhere near these events, they help bring to mind just how easily pollution can make it into the water supply. With independent labs frequently posting results about things such as medications and illicit drugs found in municipal water supplies, yet governments saying nothing about the issue, it certainly leads well owners to wonder just what is in their water as well.

Test the Water Annually for Good Measure

One thing worth noting is that once things such as lead, radioactive substances, and bacteria enter into your water supply, they can remain in the water supply as long as you are using the well, especially if you do nothing about it. So even if your water tested clean a few years ago, it is likely time to conduct another water test. Most of the contaminants that get into the water supply are fairly harmless in trace amounts, but when you are drinking them daily for years on end, the results can be quite different. Many potential carcinogens and other illness inducing contaminants can easily reach your well water and must be detected quickly.

Filtration Is Not an Acceptable Solution

Many people justify a lack of appropriate water testing by pointing out the household use of water filtration systems. While many of these systems are excellent at filtering out large particles and some can even eliminate lead and other metals from the water, the simple fact is that this is NOT a safe and viable alternative to a simple test on water from your well. Not only can radioactive substances such as radon gas and uranium make it through most filters, but you use your water to wash your car, fill your pool, and generally put it into places where it can be absorbed by the skin. Many people also use well water for irrigating gardens used for household food. In other words, if there is something in your water, it is going to get into your system even if your sink has a filter on it.

A Water Test Is Simple, Affordable, and Critical

The bottom line is that you can easily afford to have professionals test your water supply for a very wide range of contaminants. Testing today is incredibly simple and straightforward and is not nearly as time and budget consuming as many seem to think. Testing procedures and methods have become much more advanced in recent years, offering the ability to not only test more easily, but to test for a much wider range of contaminants. If you own a well that provides drinking water for your home and have not recently had a water test performed, it is certainly time that you take the opportunity to do so. Contact AquaKnow to order your water test kit at 877-734-7661 ext 2. http://www.aquaknow.com/